Files
nanopsx_sen66/firmware/components/esp_bsp/bsp_sdcard.c
T

147 lines
5.0 KiB
C

#include <sys/unistd.h>
#include <sys/stat.h>
#include "esp_vfs_fat.h"
#include "sdmmc_cmd.h"
#include "driver/sdmmc_host.h"
#include "nvs_flash.h"
#include "esp_check.h"
#include "esp_log.h"
#include "bsp_sdcard.h"
#include "bsp_spi.h"
sdmmc_card_t *card = NULL;
static const char *TAG = "bsp_sdcard";
uint64_t bsp_sdcard_get_size(void)
{
uint64_t sdcard_size = 0;
if (card != NULL)
{
sdcard_size = ((uint64_t)card->csd.capacity) * card->csd.sector_size;
}
return sdcard_size;
}
void bsp_sdcard_init(void)
{
esp_err_t ret = ESP_OK;
const char mount_point[] = "/sdcard";
ESP_LOGI(TAG, "Initialize SPI SD Card");
esp_vfs_fat_sdmmc_mount_config_t mount_config = {
#ifdef CONFIG_EXAMPLE_FORMAT_IF_MOUNT_FAILED
.format_if_mount_failed = true,
#else
.format_if_mount_failed = false,
#endif // EXAMPLE_FORMAT_IF_MOUNT_FAILED
.max_files = 5,
.allocation_unit_size = 16 * 1024};
// sdmmc_card_t *card;
sdmmc_host_t host = SDSPI_HOST_DEFAULT();
host.slot = EXAMPLE_SPI_HOST;
sdspi_device_config_t slot_config = SDSPI_DEVICE_CONFIG_DEFAULT();
slot_config.gpio_cs = EXAMPLE_PIN_SD_CS;
slot_config.host_id = host.slot;
ESP_LOGI(TAG, "Mounting filesystem");
ret = esp_vfs_fat_sdspi_mount(mount_point, &host, &slot_config, &mount_config, &card);
if (ret != ESP_OK)
{
if (ret == ESP_FAIL)
{
ESP_LOGE(TAG, "Failed to mount filesystem. "
"If you want the card to be formatted, set the CONFIG_EXAMPLE_FORMAT_IF_MOUNT_FAILED menuconfig option.");
}
else
{
ESP_LOGE(TAG, "Failed to initialize the card (%s). "
"Make sure SD card lines have pull-up resistors in place.",
esp_err_to_name(ret));
}
}
else
{
ESP_LOGI(TAG, "Filesystem mounted");
// Card has been initialized, print its properties
sdmmc_card_print_info(stdout, card);
}
}
// void bsp_sdcard_init(void)
// {
// esp_err_t ret;
// // Options for mounting the filesystem.
// // If format_if_mount_failed is set to true, SD card will be partitioned and
// // formatted in case when mounting fails.
// esp_vfs_fat_sdmmc_mount_config_t mount_config = {
// .format_if_mount_failed = false,
// .max_files = 5,
// .allocation_unit_size = 16 * 1024};
// const char mount_point[] = "/sdcard";
// ESP_LOGI(TAG, "Initializing SD card");
// // Use settings defined above to initialize SD card and mount FAT filesystem.
// // Note: esp_vfs_fat_sdmmc/sdspi_mount is all-in-one convenience functions.
// // Please check its source code and implement error recovery when developing
// // production applications.
// ESP_LOGI(TAG, "Using SDMMC peripheral");
// // By default, SD card frequency is initialized to SDMMC_FREQ_DEFAULT (20MHz)
// // For setting a specific frequency, use host.max_freq_khz (range 400kHz - 40MHz for SDMMC)
// // Example: for fixed frequency of 10MHz, use host.max_freq_khz = 10000;
// sdmmc_host_t host = SDMMC_HOST_DEFAULT();
// sdmmc_slot_config_t slot_config = {};
// // On chips where the GPIOs used for SD card can be configured, set them in
// // the slot_config structure:
// slot_config.width = 4;
// slot_config.cd = SDMMC_SLOT_NO_CD;
// slot_config.wp = SDMMC_SLOT_NO_WP;
// slot_config.width = SDMMC_SLOT_WIDTH_DEFAULT;
// slot_config.flags = 0;
// slot_config.clk = EXAMPLE_PIN_SD_CLK;
// slot_config.cmd = EXAMPLE_PIN_SD_CMD;
// slot_config.d0 = EXAMPLE_PIN_SD_D0;
// slot_config.d1 = EXAMPLE_PIN_SD_D1;
// slot_config.d2 = EXAMPLE_PIN_SD_D2;
// slot_config.d3 = EXAMPLE_PIN_SD_D3;
// // Enable internal pullups on enabled pins. The internal pullups
// // are insufficient however, please make sure 10k external pullups are
// // connected on the bus. This is for debug / example purpose only.
// slot_config.flags |= SDMMC_SLOT_FLAG_INTERNAL_PULLUP;
// ESP_LOGI(TAG, "Mounting filesystem");
// ret = esp_vfs_fat_sdmmc_mount(mount_point, &host, &slot_config, &mount_config, &card);
// if (ret != ESP_OK)
// {
// if (ret == ESP_FAIL)
// {
// ESP_LOGE(TAG, "Failed to mount filesystem. "
// "If you want the card to be formatted, set the EXAMPLE_FORMAT_IF_MOUNT_FAILED menuconfig option.");
// }
// else
// {
// ESP_LOGE(TAG, "Failed to initialize the card (%s). "
// "Make sure SD card lines have pull-up resistors in place.",
// esp_err_to_name(ret));
// }
// return;
// }
// ESP_LOGI(TAG, "Filesystem mounted");
// // Card has been initialized, print its properties
// sdmmc_card_print_info(stdout, card);
// }