Files
root 69bb47dda1 feat(firmware): support configurable SEN54 and SEN66 boards
Add the pinned Sensirion SEN66 driver, central sensor and board profiles, and a separate GPIO I2C bus for SEN66 with display. Preserve the original display layout and keep NOx and CO2 in InfluxDB. Include protocol tests, hardware workflow documentation and verified deployment results without credentials.
2026-11-09 21:44:04 +00:00

121 lines
4.2 KiB
C

/*
* Copyright (c) 2018, Sensirion AG
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* * Neither the name of Sensirion AG nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include "sensirion_common.h"
#include "sensirion_config.h"
uint16_t sensirion_common_bytes_to_uint16_t(const uint8_t* bytes) {
return (uint16_t)bytes[0] << 8 | (uint16_t)bytes[1];
}
uint32_t sensirion_common_bytes_to_uint32_t(const uint8_t* bytes) {
return (uint32_t)bytes[0] << 24 | (uint32_t)bytes[1] << 16 |
(uint32_t)bytes[2] << 8 | (uint32_t)bytes[3];
}
int16_t sensirion_common_bytes_to_int16_t(const uint8_t* bytes) {
return (int16_t)sensirion_common_bytes_to_uint16_t(bytes);
}
int32_t sensirion_common_bytes_to_int32_t(const uint8_t* bytes) {
return (int32_t)sensirion_common_bytes_to_uint32_t(bytes);
}
float sensirion_common_bytes_to_float(const uint8_t* bytes) {
union {
uint32_t u32_value;
float float32;
} tmp;
tmp.u32_value = sensirion_common_bytes_to_uint32_t(bytes);
return tmp.float32;
}
void sensirion_common_uint32_t_to_bytes(const uint32_t value, uint8_t* bytes) {
bytes[0] = (uint8_t)(value >> 24);
bytes[1] = (uint8_t)(value >> 16);
bytes[2] = (uint8_t)(value >> 8);
bytes[3] = (uint8_t)(value);
}
void sensirion_common_uint16_t_to_bytes(const uint16_t value, uint8_t* bytes) {
bytes[0] = (uint8_t)(value >> 8);
bytes[1] = (uint8_t)value;
}
void sensirion_common_int32_t_to_bytes(const int32_t value, uint8_t* bytes) {
bytes[0] = (uint8_t)(value >> 24);
bytes[1] = (uint8_t)(value >> 16);
bytes[2] = (uint8_t)(value >> 8);
bytes[3] = (uint8_t)value;
}
void sensirion_common_int16_t_to_bytes(const int16_t value, uint8_t* bytes) {
bytes[0] = (uint8_t)(value >> 8);
bytes[1] = (uint8_t)value;
}
void sensirion_common_float_to_bytes(const float value, uint8_t* bytes) {
union {
uint32_t u32_value;
float float32;
} tmp;
tmp.float32 = value;
sensirion_common_uint32_t_to_bytes(tmp.u32_value, bytes);
}
void sensirion_common_copy_bytes(const uint8_t* source, uint8_t* destination,
uint16_t data_length) {
uint16_t i;
for (i = 0; i < data_length; i++) {
destination[i] = source[i];
}
}
void sensirion_common_to_integer(const uint8_t* source, uint8_t* destination,
INT_TYPE int_type, uint8_t data_length) {
if (data_length > int_type) {
data_length = 0; // we do not read at all if data_length is bigger than
// the provided integer!
}
// pad missing bytes
uint8_t offset = int_type - data_length;
for (uint8_t i = 0; i < offset; i++) {
destination[int_type - i - 1] = 0;
}
for (uint8_t i = 1; i <= data_length; i++) {
destination[int_type - offset - i] = source[i - 1];
}
}