#include #include #include "esp_vfs_fat.h" #include "sdmmc_cmd.h" #include "driver/sdmmc_host.h" #include "nvs_flash.h" #include "esp_check.h" #include "esp_log.h" #include "bsp_sdcard.h" #include "bsp_spi.h" sdmmc_card_t *card = NULL; static const char *TAG = "bsp_sdcard"; uint64_t bsp_sdcard_get_size(void) { uint64_t sdcard_size = 0; if (card != NULL) { sdcard_size = ((uint64_t)card->csd.capacity) * card->csd.sector_size; } return sdcard_size; } void bsp_sdcard_init(void) { esp_err_t ret = ESP_OK; const char mount_point[] = "/sdcard"; ESP_LOGI(TAG, "Initialize SPI SD Card"); esp_vfs_fat_sdmmc_mount_config_t mount_config = { #ifdef CONFIG_EXAMPLE_FORMAT_IF_MOUNT_FAILED .format_if_mount_failed = true, #else .format_if_mount_failed = false, #endif // EXAMPLE_FORMAT_IF_MOUNT_FAILED .max_files = 5, .allocation_unit_size = 16 * 1024}; // sdmmc_card_t *card; sdmmc_host_t host = SDSPI_HOST_DEFAULT(); host.slot = EXAMPLE_SPI_HOST; sdspi_device_config_t slot_config = SDSPI_DEVICE_CONFIG_DEFAULT(); slot_config.gpio_cs = EXAMPLE_PIN_SD_CS; slot_config.host_id = host.slot; ESP_LOGI(TAG, "Mounting filesystem"); ret = esp_vfs_fat_sdspi_mount(mount_point, &host, &slot_config, &mount_config, &card); if (ret != ESP_OK) { if (ret == ESP_FAIL) { ESP_LOGE(TAG, "Failed to mount filesystem. " "If you want the card to be formatted, set the CONFIG_EXAMPLE_FORMAT_IF_MOUNT_FAILED menuconfig option."); } else { ESP_LOGE(TAG, "Failed to initialize the card (%s). " "Make sure SD card lines have pull-up resistors in place.", esp_err_to_name(ret)); } } else { ESP_LOGI(TAG, "Filesystem mounted"); // Card has been initialized, print its properties sdmmc_card_print_info(stdout, card); } } // void bsp_sdcard_init(void) // { // esp_err_t ret; // // Options for mounting the filesystem. // // If format_if_mount_failed is set to true, SD card will be partitioned and // // formatted in case when mounting fails. // esp_vfs_fat_sdmmc_mount_config_t mount_config = { // .format_if_mount_failed = false, // .max_files = 5, // .allocation_unit_size = 16 * 1024}; // const char mount_point[] = "/sdcard"; // ESP_LOGI(TAG, "Initializing SD card"); // // Use settings defined above to initialize SD card and mount FAT filesystem. // // Note: esp_vfs_fat_sdmmc/sdspi_mount is all-in-one convenience functions. // // Please check its source code and implement error recovery when developing // // production applications. // ESP_LOGI(TAG, "Using SDMMC peripheral"); // // By default, SD card frequency is initialized to SDMMC_FREQ_DEFAULT (20MHz) // // For setting a specific frequency, use host.max_freq_khz (range 400kHz - 40MHz for SDMMC) // // Example: for fixed frequency of 10MHz, use host.max_freq_khz = 10000; // sdmmc_host_t host = SDMMC_HOST_DEFAULT(); // sdmmc_slot_config_t slot_config = {}; // // On chips where the GPIOs used for SD card can be configured, set them in // // the slot_config structure: // slot_config.width = 4; // slot_config.cd = SDMMC_SLOT_NO_CD; // slot_config.wp = SDMMC_SLOT_NO_WP; // slot_config.width = SDMMC_SLOT_WIDTH_DEFAULT; // slot_config.flags = 0; // slot_config.clk = EXAMPLE_PIN_SD_CLK; // slot_config.cmd = EXAMPLE_PIN_SD_CMD; // slot_config.d0 = EXAMPLE_PIN_SD_D0; // slot_config.d1 = EXAMPLE_PIN_SD_D1; // slot_config.d2 = EXAMPLE_PIN_SD_D2; // slot_config.d3 = EXAMPLE_PIN_SD_D3; // // Enable internal pullups on enabled pins. The internal pullups // // are insufficient however, please make sure 10k external pullups are // // connected on the bus. This is for debug / example purpose only. // slot_config.flags |= SDMMC_SLOT_FLAG_INTERNAL_PULLUP; // ESP_LOGI(TAG, "Mounting filesystem"); // ret = esp_vfs_fat_sdmmc_mount(mount_point, &host, &slot_config, &mount_config, &card); // if (ret != ESP_OK) // { // if (ret == ESP_FAIL) // { // ESP_LOGE(TAG, "Failed to mount filesystem. " // "If you want the card to be formatted, set the EXAMPLE_FORMAT_IF_MOUNT_FAILED menuconfig option."); // } // else // { // ESP_LOGE(TAG, "Failed to initialize the card (%s). " // "Make sure SD card lines have pull-up resistors in place.", // esp_err_to_name(ret)); // } // return; // } // ESP_LOGI(TAG, "Filesystem mounted"); // // Card has been initialized, print its properties // sdmmc_card_print_info(stdout, card); // }